Rleey | Tolerance Control for OEM Custom Tungsten Carbide Slitter Blades
Full Article Structure
1. Introduction: Tolerance for Custom Carbide Slitter Blades
Slitter blade tolerance directly affects cutting smoothness, edge wear and finished product quality. Rleey provides OEM custom tungsten carbide slitter blades for film, paper, fabric and foil slitting. We match tolerance requirements strictly according to customer drawings, and deliver dimension inspection reports together with bulk orders.
2. Core Tolerance Index for Carbide Slitter Knives
- Outer diameter & inner hole tolerance
- Blade thickness and parallelism
- Flatness of blade surface
- Cutting edge runout
- Hole position tolerance for mounting holes
3. Our Grinding & Tolerance Control Process
After sintering, carbide blanks go through rough grinding, fine grinding and edge honing. Each batch is sampled or fully inspected by micrometer, height gauge and optical detector. Tight tolerance orders will be arranged with extra grinding cycles to avoid deformation.
4. Tolerance Reference Table for Common Slitter Blades
| Parameter | Standard Tolerance | Ultra-precision Option |
|---|---|---|
| Blade Thickness | ±0.02 mm | ±0.005 mm |
| Outer Diameter | ±0.03 mm | ±0.01 mm |
| Flatness | 0.02 mm /100mm | 0.008 mm /100mm |
| Edge Runout | ≤0.03 mm | ≤0.01 mm |
5. FAQ for Tolerance & Drawing Confirmation
Q1: Can you follow non-standard tolerance from our drawing?
Yes, we support custom tolerance. Ultra-tight tolerance will extend lead time and raise unit cost.
Q2: Will you mark tolerance data on the inspection report?
All measured dimension data will be listed on the batch inspection report for your incoming check.
6. Summary & OEM Drawing Confirmation
We can produce carbide slitter blades with normal or ultra-precision tolerance for slitting machines. Send your 2D drawings with tolerance notes, our engineer will review feasibility and quote for your OEM carbide blade order.
CTA Contact Zone
Submit Blade Drawings
📧 Contact Us → /contact-us.htm
Send your slitter blade drawing with tolerance requirement, we will do technical review and quote.
OEM Custom Carbide Blades
📧 Contact Us → /contact-us.htm
Custom carbide slitter blades with full inspection documents available.
Disclaimer
All tolerance data is for reference only. The final achievable tolerance depends on blade size, structure and grade. Extra cost and longer lead time apply for ultra-precision tolerance requirements. Confirm all specs before order confirmation.
