Extreme Working Condition Customization Expert

Home / All / Procurement and Selection Tips

Procurement and Selection Tips

  • Key Selection Tips for Fine Ground Tungsten Carbide Rods with h6 ToleranceNov 4,2026
    Practical buying tips for h6 tolerance fine ground tungsten carbide rods. Learn tolerance definition, surface finish check and common pitfall when purchasing carbide round bars.
  • Tungsten Carbide Wear Failure: Abrasion, Erosion & Impact Wear ExplainedNov 4,2026
    This article explains the three most common wear failure modes of tungsten carbide components: abrasion, erosion and impact wear. It describes how each wear type occurs, identifies typical application scenarios, shares practical grade selection tips and preventive measures to extend the service life of carbide wear components.
  • Why Carbide Rods Bend After Sintering? Root Causes & Quality Control FixesNov 4,2026
    This article explains the main root causes of bending and distortion of tungsten carbide rods after sintering, including green body defects, loading arrangement, sintering temperature gradient, powder uniformity and shrinkage imbalance. It introduces practical process adjustments and QC inspection methods to stabilize straightness and reduce scrap rates for carbide rod production.
  • Pores and Voids in Sintered Carbide: How Factory Inspection Catches DefectsNov 4,2026
    This article introduces pore and void defects in sintered tungsten carbide, including their classification, root causes and negative impacts on tool service life. It covers standard factory inspection methods such as density testing, metallographic microscopy and ultrasonic testing, and explains corrective process measures to reduce porosity in carbide production.
  • Rleey | Carbide Tip vs Solid Carbide: Industrial Cutting Tool Pros & ConsOct 28,2026
    This article compares carbide tipped tools and solid carbide tools, covering structure, manufacturing cost, cutting performance, heat resistance, regrinding limits and failure risks. It shares practical selection guidance for wood cutting, plastic shredding, slitting and sharpening machine blades to help industrial buyers choose between brazed carbide tips and full solid carbide.
  • Choosing Surface Finishes for Carbide Parts: Grinding, Polishing & Coating OptionsOct 28,2026
    This guide introduces common surface finishing processes for tungsten carbide parts, including grinding, polishing, PVD and CVD coatings. It compares surface quality, friction, wear performance, cost and suitable applications, helping buyers select the right finish for carbide drawing dies, cutting blades, cold forging punches and wear components.
  • Rleey | Tungsten Carbide Cold Forging Dies: Crack Causes and Fix GuideOct 28,2026
    This blog explains the main reasons carbide cold forging dies crack, including material grade mismatch, improper preload, bad surface finish, thermal stress, poor alignment and metallurgical defects. It provides practical troubleshooting and preventive solutions to extend the service life of carbide dies and pin cores for fastener cold forming.
  • Rleey | Tungsten Carbide Cold Forging Dies: Crack Causes and Fix GuideOct 28,2026
    This blog explains the main reasons carbide cold forging dies crack, including material grade mismatch, improper preload, bad surface finish, thermal stress, poor alignment and metallurgical defects. It provides practical troubleshooting and preventive solutions to extend the service life of carbide dies and pin cores for fastener cold forming.
  • Rleey | YG6, YG8 & YG15 Tungsten Carbide Grade Comparison & Application GuideOct 27,2026
    This guide compares YG6, YG8 and YG15 tungsten carbide grades from cobalt content, hardness, transverse rupture strength, wear resistance and impact toughness. It explains suitable working scenarios, common failure modes and practical selection tips to help industrial buyers pick the right carbide grade for cutting, wear protection and forming tools.
  • Rleey | Tungsten Carbide vs HSS: Cutting Tool Material Comparison GuideOct 27,2026
    This article compares tungsten carbide and high-speed steel (HSS) for cutting applications, covering hardness, heat resistance, cutting speed, toughness, service life and cost. It lists suitable scenarios, limitations and practical selection tips to help buyers decide whether carbide or HSS is the right tool material for metal cutting, wood slitting and shredding jobs.
  • Rleey | Tungsten Carbide Grain Size Effects: Fine Grain vs Coarse Grain GuideOct 27,2026
    This article explains how WC grain size changes the hardness, wear resistance, toughness and thermal stability of tungsten carbide. It compares fine grain and coarse grain carbide, lists suitable industrial applications, common mistakes and selection guidance to help buyers specify proper grain size together with cobalt grade for carbide tools and wear parts.
  • Rleey | Tungsten Carbide Solid Rods Selection Guide for CNC Machining ProjectsOct 25,2026
    Selecting a suitable solid tungsten carbide rod is critical for CNC tool manufacturing, directly affecting tool wear resistance, toughness and final machining performance. This article introduces key factors buyers should evaluate, including cobalt percentage, WC grain size, hardness, straightness, dimensional tolerance and surface finish. It covers common applications of fine, medium and coarse grain carbide rods, and practical tips for matching carbide grades to your CNC machining tasks.
Contact Person
Jane
Full Name:
Jane
Tel:

+86 15675393326

Email:
sales003@rleey.com
WhatsApp:
15675393326
follow us