Extreme Working Condition Customization Expert

Home / All / Procurement and Selection Tips

Procurement and Selection Tips

  • Rleey | Solid Tungsten Carbide Strips Selection for Wood Cutting & SlittingOct 25,2026
    Solid tungsten carbide strips are widely used as wear cutting edges for woodworking machinery, log slitting, panel cutting and lumber processing. This article explains how to select the correct carbide grade and strip dimensions for wood cutting and slitting applications. It compares carbide grades for clean wood, abrasive contaminated wood and interrupted cutting conditions, covering strip width, thickness, length, edge preparation, common failure modes such as edge chipping and abrasive wear.
  • Rleey | Custom Tungsten Carbide Project Management from RFQ to DeliveryOct 23,2026
    his article explains Rleey’s complete workflow for custom tungsten carbide projects, starting from customer RFQ submission, technical evaluation, drawing review, quotation, sample validation, mass production, in-process QC and final delivery. Our engineering team checks drawings for manufacturability, tolerances, material grades and potential risks before confirming orders. Strict quality inspection is implemented at every production stage.
  • Rleey | Tungsten Carbide Cutting Blades for Industrial Knife SharpenersOct 23,2026
    Tungsten carbide blades are core wear components for industrial knife sharpening machines, delivering far superior edge retention compared to high-speed steel blades. This article explains the critical factors that determine the service life of carbide sharpening blades, including grade selection, edge geometry, surface finish, blade thickness and mounting design. It also analyzes common failure modes such as edge chipping and abrasive wear, and shares practical selection and maintenance tips.
  • Rleey | Buying Guide for Custom Tungsten Carbide Punches & Dies for Cold ForgingOct 21,2026
    Custom tungsten carbide punches and dies are core tooling for metal cold forging, widely used to manufacture bolts, nuts, rivets and other fasteners. This article outlines critical factors buyers need to evaluate before placing orders, including carbide grade selection, surface finish, dimensional tolerance, pre-stress sleeve design, common failure modes, in-process QC and sample validation.
  • Rleey | Tungsten Carbide Factory with Complete Production & QC WorkflowOct 21,2026
    his factory tour overview walks through Rleey’s tungsten carbide production workshop and complete quality control workflow. Starting from raw WC powder receiving, the process covers powder mixing, pressing, vacuum sintering, HIP treatment, precision machining and final inspection. Every stage has strict in-process QC checks, including dimensional measurement, hardness, density, TRS and metallographic testing in our in-house lab.
  • Rleey | Tungsten Carbide Wear Plate Selection Guide for Mining & ConstructionOct 19,2026
    Carbide wear plates are widely used in mining and construction equipment to protect metal substrates from severe abrasive wear and impact. This selection guide explains how to pick the correct tungsten carbide grade and plate thickness according to working conditions. It compares fine, medium and coarse grain carbide grades for different abrasion and shock loads, covers thickness selection rules, common installation styles, and typical application scenarios.
  • Rleey | Tungsten Carbide Manufacturer with Professional Metallographic InspectionOct 19,2026
    Metallographic inspection is a destructive microscopic QC test for cemented tungsten carbide following ISO 4499 standards. The process includes sample cutting, mounting, grinding, polishing and chemical etching to observe internal material microstructure. Inspectors evaluate WC grain size uniformity, cobalt binder distribution, porosity, free graphite and harmful brittle eta phase. Hardness and density tests alone cannot detect hidden microstructural defects.
  • Rleey | Solid Carbide Rod Manufacturer | Precision Straightness Grinding ControlOct 13,2026
    This article explains how manufacturers control straightness for solid tungsten carbide rods in the grinding process. It covers root causes of rod bending, process controls from sintered blank pre-selection, centerless grinding parameters, fixturing, stress relief and final inspection. It helps buyers understand what affects carbide rod straightness and how to specify straightness tolerance for PCB micro drills, end mills and other cutting tools.
  • Rleey | Tungsten Carbide Precision Machining | Grinding, EDM & Polishing ServicesOct 13,2026
    This article introduces three core precision machining methods for tungsten carbide: grinding, EDM and polishing. It explains the working principles, suitable scenarios, advantages and limitations of each process. It also covers surface finish, dimensional accuracy and common pitfalls when machining hard carbide materials, helping buyers select proper machining solutions for carbide dies, pin cores and wear parts.
  • Rleey | HIPed Tungsten Carbide Manufacturer | HIP & Vacuum Sintered Carbide PartsOct 12,2026
    This article compares hot isostatic pressing (HIP sintering) and conventional vacuum sintering for tungsten carbide manufacturing. It explains the working principles of both sintering technologies, demonstrates the performance advantages of HIP treated carbide including near-zero internal porosity, higher fatigue and bending strength. It introduces suitable application scenarios, limitations and cost considerations to help buyers choose the proper sintering process for carbide components.
  • Rleey | Tungsten Carbide QC Lab | Hardness, Density, TRS & Metallography TestingOct 12,2026
    This article introduces the quality control lab tests for tungsten carbide products, covering four core inspection items: hardness, density, transverse rupture strength (TRS), and metallography analysis. It explains test principles, acceptance criteria, what defects metallography can detect, and how these lab data support COA documents. It helps overseas buyers understand carbide quality verification standards and validate product consistency before shipment.
  • Rleey | Tungsten Carbide Manufacturing Process Step by Step: Powder to Finished ProductOct 11,2026
    This blog walks through the complete tungsten carbide manufacturing workflow, starting from raw WC powder preparation all the way to final finished carbide components. It breaks down each critical production stage including powder mixing, pressing, sintering, blank inspection, precision machining, surface treatment and final quality testing. Readers can learn core technical principles, key quality control points and common defects formed during manufacturing
Contact Person
Jane
Full Name:
Jane
Tel:

+86 15675393326

Email:
sales003@rleey.com
WhatsApp:
15675393326
follow us